AC Condenser Compressor Replaces Bristol H23R513ABC, H23R513ABCA

This is a BRAND NEW 4 / 5 Ton, 208-230 Volt, 1-Phase, Direct Factory Replacement Bristol Compressor. The Bristol Model is H22A543ABCA. It is rated at 53,419 BTU. In some instances, small piping changes may be needed. Thanks for looking and good luck!

Capacity (BTU/HR):	53419
Type:	Reciprocating
Refrigerant:	R-22
Input Voltage (V):	208
Input Voltage (V):	230
No. of Phases:	1
Freq. (Hz.):	60
Run Capacitor (uF/V):	45/440
Start Capacitor (uF/V):	135-155/330
Rated Load Current (A):	24.4
Max. Continuous Current (A):	45.0
Locked Rotor Current (A):	138.0
Crankcase Heater Included?:	Yes
Soundwrap (Brinmar):	68-25217-10
Suction Line Location:	2
Suction Line Height (in.):	14
Suction Line Configuration:	Stub Out
Suction Line Size (in.):	7/8
Discharge Line Location:	4
Discharge Line Height (in.):	3-5/16
Discharge Line Configuration:	Up
Discharge Line Size (in.):	1/2
Overall Compressor Height (in.):	16-3/8
Mounting Base Dimensions (in. x in.):

To properly install a Compressor you need to have and use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. If the compressor is damaged due to improper installation procedures, the liability falls to the installer. All Sales are Final and there are no warranties!