AC Condenser Compressor Replaces Tempstar Heil ICP 1096770
(No reviews yet)
Write a Review
- UPC:
- CMP63 653-U1
Description
This is a 3.5 Ton 208/230 Volts 3-Phase(Not for Residential Use) Direct Factory Replacement Copeland Scroll Compressor. TheCopeland Model # is ZR42K5E-TF5-800. It is rated at 42,200 BTU. In some instances, small piping changes may be needed.Thanks for looking and good luck!This compressor is designed to replace ICP/Heil/Tempstar/Comfortmaker/Sears/Arcoaire/Snyder General/Copeland numbers: 1096770
TECHNICAL SPECIFICATIONS
To properly install a Compressor you need to have and use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. If the compressor is damaged due to improper installation procedures, the liability falls to the installer. All Sales are Final and there are no warranties!
TECHNICAL SPECIFICATIONS
| Capacity (BTU/HR): | 42200 |
|---|---|
| Type: | Scroll |
| Refrigerant: | R-22 |
| Input Voltage (V): | 208 |
| Input Voltage (V): | 230 |
| No. of Phases: | 3 |
| Freq. (Hz.): | 60 |
| Rated Load Current (A): | 14.3 |
| Max. Continuous Current (A): | 20.0 |
| Locked Rotor Current (A): | 93.0 |
| Crankcase Heater Included?: | No |
| Crankcase Heater Part Number: | |
| Soundwrap (Brinmar): | |
| Refrigerant Oil: | POE () |
| Suction Line Location: | 2 |
| Suction Line Height (in.): | 11-3/16 |
| Suction Line Configuration: | Stub Out |
| Suction Line Size (in.): | 7/8 |
| Discharge Line Location: | 3 |
| Discharge Line Height (in.): | 15-7/16 |
| Discharge Line Configuration: | Stub Out |
| Discharge Line Size (in.): | 1/2 |
| Overall Compressor Height (in.): | 16-7/16 |
| Mounting Base Dimensions (in. x in.): | 7-1/2 x 7-1/2 |
To properly install a Compressor you need to have and use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. If the compressor is damaged due to improper installation procedures, the liability falls to the installer. All Sales are Final and there are no warranties!
Replaces:
Repair Difficulty Level
Partial list of Model numbers that use this part:
Use Ctrl+F and enter your model number for a quick search.
Related Products
$976.95
AC Condenser Compressor Replaces Tempstar Heil ICP 1050833
$1,401.95
This is a BRAND NEW 4 / 5 Ton, 208-230 Volt, 1-Phase, Direct Factory Replacement Bristol Compressor. The Bristol Model is H22A543ABCA. It is rated at 53,419 BTU. In some instances, small piping...
$1,401.95
AC Condenser Compressor Replaces Tempstar Heil ICP 1172275
$1,264.95
This is a 4 Ton 208/220 Volts 1-PhaseDirect Factory Replacement Copeland Scroll Compressor. The Copeland Model # is ZP49K5E-PFV-800. It is rated at 49,400 BTU and is for use with R-410A Freon, Not...
$1,264.95
AC Condenser Compressor Replaces Tempstar Heil ICP 1172221
$1,022.95
This is a 2- 2.5 Ton 208/220 Volts 1-Phase Direct Factory Replacement Compressor (Copeland) The Copeland Model # is CR32K6E-PFV-875. It is rated at 32,000 BTU. Thanks for looking and good...
$1,022.95